Premium glass cleaner, 4 x 1 litre, including 1 spray nozzle.
The Bohle glass cleaner is ideal for windows, mirrors, car windows and other glass surfaces; prevents new dirt build-up · no streaks · no propellant · with 4 bottles, 1 spray nozzle and 1 extra snap-on cap to prevent leaks during transport. · fully biodegradable Please note: not suitable for UV bonding! Suitable only for cleaning after bonding!
Professional Glass Cleaner, aerosol can.
In a handy aerosol can with eco-friendly propellant · simply spray on and wipe off — done · suitable for glass panes, smooth plastic surfaces, mirrors, car windows, tiles, for workshops and homes, display cabinets and shop windows; ensures mirror-smooth, streak-free surfaces Ideally suited for cleaning glass components after fusing. Please note: not suitable for pre-cleaning! Only suitable for cleaning after bonding! Pressurised container. Protect from direct sunlight. Do not expose to temperatures above 50 °C.Application note:Observe the safety data sheet and handling instructions. Not suitable for pre-cleaning prior to UV bonding. For cleaning after bonding only.
Silberschnitt® cutting fluid W26, 1 litre
Ensures a clean and precise break during cutting. It binds loose glass particles and ensures the wheel runs smoothly.When cutting fluid is used, the surface tension in the glass is significantly reduced, allowing the cutting fluid to penetrate the cutting surface more quickly and ensuring an optimal cutting result. Furthermore, the cutting fluids lubricate the cutting wheel, minimising friction and extending its service life. When cutting glass with cutting fluid, the cutting pressure can be reduced, resulting in less damage to the glass surface, which also leads to less chipping and a significantly better quality of the edges. Extends the service life of the glass cutter Stabilises the applied stress in the glass over a longer period No damage to the glass surface; splintered glass fragments are bonded Easy to wash off the glass surface
Silberschnitt® cutting fluid, 50 ml.
The Silberschnitt® cutting fluid ensures a smooth and precise break during cutting. Any glass particles produced are bound, and the wheel is guaranteed to run freely at all times.When cutting fluid is used, the surface tension in the glass is significantly reduced, allowing the cutting fluid to penetrate the cut surface more quickly and ensuring an optimal cutting result. Furthermore, cutting fluids lubricate the cutting wheel, minimising friction and extending its service life. When cutting glass with cutting fluid, the cutting pressure can be reduced, leading to less damage to the glass surface and therefore less chipping and a significantly better edge quality.Using cutting fluid in combination with our angles and rulers does not affect the material.Application note:When processing thick glass, it is particularly important to use sufficient cutting fluid.
Vetropol glass polish.
Vetropol is a special aluminium oxide-based polishing compound for the chemical-mechanical polishing and cleaning of flat glass. It is used to remove stubborn contaminants, swirl marks and haze, as well as small and minute scratches and early-stage glass corrosion. The ready-to-use, liquid polish is applied to felt discs, polishing pads or similar. Vetropol is suitable for all polishing media, such as pitch, felt, cork, Pellon, polyurethane, etc. Unlike cerium oxide-based polishes, Vetropol is very easy to rinse off and has a chemically defined composition. It reduces the roughness of the glass surface and the sodium content, which helps to minimise coating defects. Application note:The product must be shaken well before use.