EZL30-8/300-80 single-hand glue gun
Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics are combined with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as finished and ground steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force.
EZL45-8/450-80 single-handed glue gun
Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications; it can clamp and expand/spread, thanks to a wide variety of models in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2.700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular components to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple push-button release mechanism on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force
EZL60-8/600-80 single-hand glue gun
The EZ series of single-hand clamps offers a wide range of applications; conversion for spreading is simple and requires no additional tools, thanks to a wide range of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. The cross prisms integrated into the plastic protective caps allow round, pointed and angular components; by moving the upper section to switch from clamping to spreading; for the EZM, EZL and EZXL sizes, this can be done without any movement thanks to the one-touch release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters.
EZM30-6/300-60 single-handed glue gun
Bessey EZM one-hand glue clamp. The EZ series of one-handed clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force