Start

The telescopic counterweight ensures a stable position when using the Liftmaster B1 control unit.

The Veribor® 3-nap suction lifter (BO603.1G) features a large, non-slip grip surface, ensuring it fits perfectly in the hand. The rocker switches are ergonomically designed and user-friendly. The extra-wide surface ensures optimum force transmission. Crucial to the quality are the high-grade, PAH-free rubber discs in tried-and-tested Bohle quality: they are dimensionally stable, yet soft enough to adapt to the surface under vacuum. Compared with the 2-nap suction lifter, the 3-nap suction lifter achieves an 80% higher load-bearing capacity and holds loads of up to 90 kg (double safety factor). It is suitable for all materials and objects with gas-tight surfaces. Product highlights High load-bearing capacity Ergonomic Robust plastic Made in Germany Non-slip grip coating

6-in-1 Putty Knife for multiple applications Removing joints and widening cracks for repair work Metal cap in the handle for hammering nails into plasterboard Putty knife for removing filler Nail puller integrated into the blade Recess in the blade for cleaning paint rollers Sharp blade for scraping off wallpaper and paint residue Soft-grip handle for extra comfort

The high-quality BO 603.021 vacuum lifter from Veribor® is the ideal solution for lifting and transporting gas-tight sheet materials. Regardless of the material, the vacuum lifter can carry a load of up to 100 kg, including a safety factor of 2. The design of the vacuum lifter is both elegant and functional. Whilst the large suction cups serve to distribute the vacuum pressure optimally across the outer surface of the rubber disc, the wide contact surfaces of the lifting levers ensure ideal force transmission during lifting – whether operated with the palm of the hand or the thumb. Large rings also provide additional stability for the rockers. The third lever, which can be rotated 90 degrees in two directions, thereby reducing the width of the 3-head suction lifter, offers greater flexibility in use. Manufactured to Bohle’s proven quality standards.Veribor® is a quality brand of the Bohle Group. The products have been developed and manufactured exclusively in Germany since 1953 – with particular attention to high safety standards and ergonomics thanks to multi-stage testing procedures. They are free from carcinogenic hydrocarbon compounds (PAHs). Veribor® high-quality suction lifter with three suction cups 100 kg load capacity each with a double safety factor For all gas-tight surfaces Made from lead-free aluminium PAH-free Made in Germany

Additional arm for the Liftmaster vacuum lifter. This tilt-and-swivel arm allows the vacuum lifter to be adapted for independent use on, for example, a crane runway or hydraulic crane. B18DM4GS The handy MANUAL vacuum lifter (BO B18DM4GS), with 360° rotation and 90° tilt capability, has no electric pump and can therefore be used anytime, anywhere, and operated with one hand. Thanks to its dual circuit, reserve tanks, vacuum gauge and visual vacuum loss indicator, it also offers a high level of safety. This vacuum lifter is characterised by its compact design and low weight of 20 kg. It can be used in various positions by mounting it on the lashing hooks. PLEASE NOTE: The product is shown in the photo with the additional crane arm. This is not included as standard but can be ordered as an optional extra if required 

Set of 2 x BO 600.0BL in a secure plastic carrying case. These practical carrying cases are designed to protect your Veribor® suction cups and keep them safe in the long term. The cases are designed to fit the suction cups and protect the rubber discs from damage.Quick and effective operation thanks to the plastic handle. Ideal for flat, gas-tight surfaces such as glass, metal, etc. Simply attach the suction cup and close the handle with one hand whilst pressing it against the surface. For hassle-free removal, the design of the fixed handle and the movable plastic handle offers two options that are ideal for individual applications. There is a larger opening in the centre, so that after use, the movable plastic handle can be easily pushed away from the fixed handle using your thumb. In addition, there are two release tabs on the outer edges of the movable plastic handle, which can also be easily pushed away with your thumb to release them.

2-head glass holder with vacuum safety indicatorØ 120 mm suction cup, 50 kg load capacity, plastic housingFor lifting, carrying and holding. Vacuum safety indicator, which provides a visual warning of pressure loss. Secure grip and comfortable handling. This glass carrier offers a high level of carrying comfort thanks to a significantly enlarged handle. It has a built-in vacuum indicator that lights up red when the pressure drops. The newly developed rubber disc allows a load to be held for longer; it also enables the brief handling of sandblasted glass.

The sturdy Bohle storage case, suitable for 2 suction cups with long handles (e.g. BO 602.4BL). The case prevents dirt and damage and protects your tools with its foam insert.Dimensions 340 x 130 x 270 mm

Sturdy case, suitable for 3 x 2-head or 2 x 3-head suction lifters. Prevents damage or soiling and protects your tools with the foam insert.Dimensions 450 x 360 x 123 mm

Bohle’s manual lifting device is characterised by its extremely compact design and low weight. It has a load capacity of 180 kg.The lifting device does not require an electric pump and can therefore be used anywhere and at any time. It offers maximum safety thanks to a dual-circuit system, reserve tanks, a vacuum gauge and an additional visual vacuum loss indicator.Your benefits:Vacuum generated by a hand pump, so always ready for useMains-independent, no batteries required2-circuit system with 4 suction cupsFor use on building sites and in the workshopVery flat and compactVacuum gaugeRotates 360° / tilts 90°Vacuum display via 2 vacuum gaugesMaximum operational altitude 1,680 m above sea levelWeighs just 31 kg

The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs

The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs

The Carrymate X-Spanders fit any Carrymate handle. You can easily replace the old Spanders by simply placing them over the clamping jaws.

The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs

The Carrymate flat-head tool is a sturdy tool for removing roofing materials, roofing felt, carpet and many other materials. It is also suitable for unrolling stretch sheets and similar materials. On the one hand, the handle protects hands and fingers, whilst on the other hand it also ensures greater force is applied with less effort. The new XL version makes it even easier for the user to get the right grip for the material being worked on. It is simple to use. Only a corner of, for example, a carpet needs to be torn off by hand. This corner is then placed between the “gripping shear/clamping system”. By tightening the pull handle, the item is securely clamped and can be pulled out effortlessly.

The Carrymate Portman extension fits the Portman XL and XXL. It can be easily attached, and the Portman is immediately ready for use.

The CRL Pump-Up vacuum lifters for curved glass are designed to enable the safe and easy lifting and moving of large, curved glass sheets, windscreens and thin, flexible materials such as 2 mm thick sheet metal. The handle is made from robust ABS plastic and the rubber suction cup has a diameter of 203 mm. The vacuum is applied to flat, non-porous surfaces within seconds by pressing the pump plunger until it is fully seated in the handle, past the red safety indicator. Once secured, the glass sheet can be easily lifted by hand. The rubber suction cup can withstand virtually any manual lifting movement without damaging the delicate surface and can be released directly from the material by pressing the thumb release. A protective case is included.The minimum recommended radius for curved glass is 31.5 inches (800 mm).Thumb-operated quick-release mechanismIncludes protective carrying case8" (203 mm) vacuum padPrimarily designed for lifting curved architectural glass.Lifting capacity 125 lbs (57 kg)The red line indicator alerts the user to any loss of vacuum.

Scrapers are used to remove old filler residue from grooves. When used in combination with the matching filling knives, they enable professional repairs to sealant joints. The “Don Carlos” brand is renowned for its professional quality, which meets the highest standards. HS Code: 8211 92 00.

Scrapers are used to remove old filler residue from grooves. When used in conjunction with the corresponding filling knives, they enable professional repairs to sealant joints. The “Don Carlos” brand is renowned for its professional quality, which meets the highest standards.HS Code: 8211 92 00

Wooden window frames without knots. Glazing levers are used to position glazing units correctly. The Economy glazing lever is made from beech wood. It can be used as a lever wherever delicate materials need to be lifted. Length 280 mm Width 70 mm

Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics are combined with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as finished and ground steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force.

Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications; it can clamp and expand/spread, thanks to a wide variety of models in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2.700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular components to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple push-button release mechanism on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force

The EZ series of single-hand clamps offers a wide range of applications; conversion for spreading is simple and requires no additional tools, thanks to a wide range of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. The cross prisms integrated into the plastic protective caps allow round, pointed and angular components; by moving the upper section to switch from clamping to spreading; for the EZM, EZL and EZXL sizes, this can be done without any movement thanks to the one-touch release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters.  

Bessey EZM one-hand glue clamp. The EZ series of one-handed clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force